Dr. Nripen Mondal,

Mechanical Engineering


Dr. Nripen Mondal

Designation: Assistant Professor

Email Id.: nripen_mondal@rediffmail.com

Subjects Taught


[1] Fluid Mechanics & Machineries
[2] Fluid Power & Control
[3] Turbomachinery
[4] Computational Fluid Dynamics
[5] Metrology and Measurement
[6] AutoCAD & Solid works
[7] Engineering Drawing and Computer Graphics

Current Administrative Post


Assistant Professor

Research Interest


1. Fluid Mechanics
2. Computational Fluid Dynamics(CFD)
3. Solid Mechanics, FEM
4. Optimization

Educational Qualification


DoctoratePhD:Jadavpur University
Post GraduationM.E: Jadavpur University
GraduationBTech:Kalyani Govt. Engg. College

Memberships


NA

Previous Work Experiences


Power Engineering & Mechanical Engineering Department Jadavpur University guest faculty (January 2014-2016)

Other Professional Activities


W.B.D.H.E.S.T.B sponsored Project Running(Co-PI)
Faculty Development Program Sponsored by W.B.D.H.E.S.T.B

Awards and Honours


Beast Research Paper Award" 3rd Regional Science & Technology Congress (RSTC-18)

Career Development Program/Seminar Attended


one

M.Tech Projects Supervised


Three

International Journal Publications


1. Nripen Mondal, Rana Saha, Dipankar Sanyal"Designing Aerostatic Bearing With Counterbalancing Gaps for Lifting a Heavy payload" Journal of Tribology-ASME,(SCI),2014,pp.031701-10.

2.Nripen Mondal, Biond K Saha, Rana Saha, Dipankar Sanyal"High-Thrust Aerostatic Bearing Design through transient perturbation Modelling with Numerical Validation"Journal of Dynamic System Measurement and control –ASME (SCI), 2018,pp.041012-8

3.Nripen Mondal, Rana Saha, Sanjib K Acharyya,Dipankar Sanyal,Kamelesh Majumder"Optimum Design of Mounting Components of a Mass Property Measurement System"Measurement Elsevier (SCI),2016,pp.309-321

4.Nripen Mondal, Rana Saha, Dipankar Sanyal"Modeling and performance analysis of aerostatic bearing for lifting heavy payload"Procedia Engineering Elsevier(Scopus),2014,pp.123-128.

5.Nripen Mondal, Rana Saha, Dipankar Sanyal"Numerical analysis of aerostatic bearing with central feeding orific with CFD validation"Matrial Today Proceeding Elsevier(Scopus),2017,pp.9860-9864.

6.Nripen Mondal,Biswajit Sing Sardar, Ranendra Nath Halder,Santanu Das"Observation of Drilling Burr and finding out the condition for minimum burr formation"International Journal of Manufacturing Engineering,2014,pp.001-12.

7.Bishal Dey Nripen Mondal , SumanMondal"Experimental Study to Minimize the Burr formation in drilling process with Artifical Neural Network (ANN) Analysis" IOP Conference Series: Materials Science and Engineering , Scopus Indexed, Institute doi:10.1088/1757-899X/377/1/012120

8.Nripen Mondal, Madhab Chandra Mandal, Bishal Dey,Santanu Das"Optimization On the Process Parameters to Minimize in Drilling Burr Formation by Genetic Algorithm from Developed Predictive Modeling using ANFIS and SVR"Journal of Engineering Manufacturing IMECH-PartB,Commenicate 2019.

9.Nripen Mondal, Sudip Mandal and Madhab Chandra Mandal"Flower pollination algorithm approach for drilling burr formation optimization with ANN-Regression analysis"Measurement Elsevier,Commenicate 2019.


International Conference Attended


1.Nripen Mondal, Rana Saha, Dipankar Sanyal"Aerodynamic Thrust Bearing with Axial and Transverse Loading"38th National
Conference on Fluid Mechanics and Power, Fluid (FMFP-2011),NIT Bhopal

2.Nripen Mondal, Rana Saha, Dipankar Sanyal"Desiging aerostatic thrust bearing for lifting stationary payload co-axial bearing"40th National
Conference on Fluid Mechanics and Fluid Power, Fluid (FMFP-2013) NIT Hamipur

3. Nripen Mondal, Sanjib K Acharyya, Rana Saha, Dipankar Sanyal"Finite Element Simulation of Mass Property Measurement System"National Conference on Sustainable Development through innovative research in science and technology , Jadavpur University 2012.

4.Nripen Mondal, Rana Saha, Dipankar Sanyal"Performance analysis of an aerostatic bearing having two layers of air feeding"5th international 41th National Conference on Fluid Mechanics and Fluid Power(FMFP-2014) IIT Kanpur

5.Nripen Mondal, Rana Saha, Dipankar Sanyal"CFD study on aerostatic bearing design performance"International Mechanical Engineering Congress NIT Trichy,2014

6.Nripen Mondal,Biswajit Sing Sardar, Ranendra Nath Halder,Santanu Das"An Experimental Observation on Drilling Burr Formation Under Different Environment Condition"4th International &25th All India Manufacturing Technology, Design and Research Conference, (AIMTDR-2012) Jadavpur University.

7.Nripen Mondal, Rana Saha, Dipankar Sanyal"Steady state characteristics of a double axial pad aerostatic thrust bearing having single row air feed"42nd National Conference on Fluid Mechanics and Fluid Power, Fluid (FMFP-2015) NIT Surathkal.

8.Bishal Dey,Chitradittya Barman, DebrajPaul,Nripen Mondal"Optimization on the process parameters to minimize in drilling burr formation with Anova analysis"1st International Conference on Mechanical Engineering (INCOM18)Jadavpur University .

9.Arnab Ray, Nripen Mondal, Arijit Kundu"Topology optimisation of a motorcycle chassis"1st International Conference on Mechanical Engineering (INCOM18) Jadavpur University

10.Tanumoy Banerjee, Nripen Mondal" Study of Numerical Simulation & Investigation of Micro-Scale Hydrogen & Methene Diffusion Flame"International Journal for Scientific Research & Development,2018,pp.495-499.

11.Sourav Das, Nripen Mondal, Naim Hossain"Hull shape optimisation of Autonomous Underwater Vehicle using CFD Analysis"International Conference on Recent Innovation and Developments in Mechanical Engineering
(IC-RIDME18) NIT Meghalaya Shilong.

12.Suman Das, Arijit Kundu, Nripen Mondal"Exploration of the uses of Geothermal Heat pump in Jalpaiguri"3rd Regional Science & Technology Congress (RSTC-18)Jalpaiguri Govt.Engg.College

13.Suman Das,Ayan Sarkar, Nripen Mondal, Madhab C. Mandal"The investigation of Burr Formation in Drilling process Experimental and Statistical Analysis"3rd Regional Science & Technology Congress (RSTC-18)Jalpaiguri Govt.Engg.College

14.Sudish Ray, Arijit Kundu, Nripen Mondal"An Extensive Study on the Enhanced Flow Boiling of Eco-friendly Refrigerants"19th ISME Conference on Advances in Mechanical Enginering (NIT Jalandhar).

15.Ayan Sarkar, Santanu Sarkar, Nripen Mondal"Parametric Study of Aerostatic Bearing Performance Analysis With CFD Validation "National Conference on Computational Modeling of Fluid Dynamics problems (CMFDP-19)NIT Warngal

16.Tanumoy Banerjee, Nripen Mondal, Md, Naim Hossian"Transient CFD analysis of Hull Shape of Autonomous Underwater Vechicle based on Minimization of Drag force on it & structural analysis of the optimized shape"National Conference on Computational Modeling of Fluid Dynamics problems (CMFDP-19)NIT Warngal .

17.Debjit Misra, Santanu Das , Nripen Mondal"On the Estimation of Drilling Burr Formation with Artificial Neural Network Analysis"National Conference on Trends and Advances in Mechanical Engineering (TAME-19).

18.Sudish Ray, Arijit Kundu, Nripen Mondal"New Emergent Refrigerants’ Performance in Flow Boiling: An Extensive Study"National Conference on Trends and Advances in Mechanical Engineering (TAME-19).

19.Santanu sarkar, Ayan sarkar, Nripen Mondal,Md Naim Hossain"CFD Analysis of Fish Movement in Open Channel under laminar Flow Condition"National Conference on Trends and Advances in Mechanical Engineering (TAME-19).

20.Suman Das, Bikash Banerjee, Nripen Mondal"An Experimental Study of Grinding Performances of a Mild Steel under Different Environmental conditions Using Various types of Nozzels"National Conference on Trends and Advances in Mechanical Engineering (TAME-19).

21.MD Shahbaz, Md Naim Hossain, Nripen Mondal," Numerical Validation of Flow Boiling Analysis in ANSYS Fluent with VOF Approach"National Conference on Trends and Advances in Mechanical Engineering (TAME-19).

22. Tanumoy Banerjee , Nripen Mondal, ” Numerical Study of Structure of Micro (Millimeter Size) Laminar-jet Diffusion Flame for Methane gas as fuel” International Conference on Advancements in Mechanical Engineering (ICAME 2020), Aliah University, Kolkata

23. Kundan Chakraborty,Shoam Das, Haradhan Santra, Tanumoy Banerjee, Nripen Mondal, Madhab Mandal,” Experimental Study on Drilling Burr Formation Process Parameters Optimization Based On RSM Method and ANOVA Analysis” International Conference on Advancements in Mechanical Engineering (ICAME 2020), Aliah University, Kolkata

24. Dipanjan Dey, Nripen Mondal, Madhab Chandra Mandal " An Experimental Study on Electrical Discharge Machining process parameters optimization based on RSM method"4th Regional Science & Technology Congress (RSTC-19) At Alipurduar College.





Research Scholar


one (Co-supervisor)



Jalpaiguri Government Engineering College (Autonomous)

© 2019 All Rights Reserved.